As she came in no stop tail and strange tailpiece
Found only one pickup actually working… played OK though
Interesting headstock work with glued on washers as bushes…
Few cracks around fretboard needed fixing

Glue all over the place… poor quality tuners…
galvanized wood screws… nice
B;acl paint on the edges..
Finish cracks…
Spinder next inside pickup cover
Mahogany Block, Good Tenon joint, Maple Neck
Tuners coming out!
Washers to come off, then sand surface down and veneer cover
Tintebond on!
Holes filled with hardwood ;-). Notice dowels in original ped holes
All neatened up and finished in finishing oil. Not back to original but customised.
Avon Logo added.. just looked better than no logo
Grover Imperials added
Headstock looks good IMHO
Battered but now smooth and clearcoated
Frets levelled
Strung up and going!
Tokai PAF in the front and Gotoh 10.5K Dimarzio style in the rear
MIJ Tailpiece added

Lookig pretty good if I do say so myself A Nice Made in Korea late 80s Antoria Rockstar. Most likely made by Samick before they worked for Epiphone. Good build quality but needed some work to get her going again. Not a complete restoration more of a low cost customisation project. She sounds Lovely real jazzy front pickup sound and pure rock from the rear. A keeper ![]()
Hi mate,
Where did you get the tailpiece an Bridge from?
I am doing a custom/fix up on the same guitar.
All the standard easy to get ES 335 parts do not fit.
If you could back to me it would be amazing because I am so stuck.
Tom
They are all slightly different from spec. The Bridge has to be the original type the post distance is closer than normal TOM.. I have a spare but with slots cut if you are really stuck. Also a spare tailpiece but would need you to measure yours accurately from center of post to centre..
One of these Antoria is currently for sale at Herron Music in Bristol.